THERMO SET®

Thermo-Setting Technology for Well Integrity , Drilling Efficiency

THERMOSET® APPLICATION AREAS

Typically small volumes of ThermoSet® slurry are required to achieve the desired results – often less than one cubic meter for remedial applications. Slurries are mixed at the well site under supervision of a Pluto engineer and pumped downhole using conventional techniques and equipment.

g1.jpg
g2.jpg

Lost Circulation

Benefits

  • Ideal for carbonates.
  • Pumped through the bit and mud motors – no need to pull BHA.
  • Liquid to solid in 120 seconds at set point.
  • Ready to drill out in 2 hours after placement.
  • Withstands 30% contamination without affect on setting characteristics.
g3.jpg

Wellbore Stabilization

Benefits

  • Pumped through the bit – no need to pull BHA.
  • Ready to drill out in 2 hours after placement.
  • Easy to drill.
  • Withstands 30% contamination without affect on setting.
  • Leaves gauge hole over treatment length.
g4.jpg

Water Flow Shut Off

Benefits

  • Can be pumped easily through perforations.
  • Easy to drill.
  • Set point allows a known calculated squeeze volume.
  • Pressure in crease at setpoint indication of job completion.
g6.jpg

Temporary Plug to Protect Producing Formation

Benefits

  • Can be set with coil tubing (extremely low friction pressure).
  • No damage to formation.
  • Plug will hold formation pressure.
  • Well returned quickly to production.
  • Workover rig time minimised.
  • No transition / channeling between fluid and set point.
g7.jpg

Surface Casing Vent Flow

Benefits

  • Low-viscosity, thin slurry with small particle size easy to place in micro annulus.
  • Environmentally friendly and non-toxic to ground water.
  • Right angle set stops gas.
  • Does not dehydrate drilling squeeze displacement.